Chapter hub
Chapter 72: Iron and steel
Browse verified, indexable HTS detail pages in this chapter. Each record links to base duty, source URL, retrieval date, and review boundaries. Base iron and steel materials, bars, sheets, and primary forms.
194 indexable codesPage 2 / 2
Common headings on this page
7216 · 27217 · 167218 · 27219 · 137220 · 77221 · 17222 · 47223 · 27224 · 17225 · 10
HTS detail pages
7216.61.00.00
Obtained from flat-rolled products
Base rate: FreeSource retrieved: 2026-06-01
7216.91.00
Cold-formed or cold-finished from flat-rolled products
Base rate: FreeSource retrieved: 2026-06-01
7217.10.10.00
Of a thickness not exceeding 0.25 mm
Base rate: FreeSource retrieved: 2026-06-01
7217.10.20.00
Of a thickness exceeding 0.25 mm but not exceeding 1.25 mm
Base rate: FreeSource retrieved: 2026-06-01
7217.10.30.00
Of a thickness exceeding 1.25 mm
Base rate: FreeSource retrieved: 2026-06-01
7217.10.40
With a diameter of less than 1.5 mm
Base rate: FreeSource retrieved: 2026-06-01
7217.10.50
With a diameter of 1.5 mm or more
Base rate: FreeSource retrieved: 2026-06-01
7217.10.60.00
Other wire
Base rate: FreeSource retrieved: 2026-06-01
7217.10.70.00
Flat wire
Base rate: FreeSource retrieved: 2026-06-01
7217.10.80
Round wire
Base rate: FreeSource retrieved: 2026-06-01
7217.10.90.00
Other wire
Base rate: FreeSource retrieved: 2026-06-01
7217.20.15.00
Flat wire
Base rate: FreeSource retrieved: 2026-06-01
7217.20.30.00
With a diameter of 1.5 mm or more and containing by weight less than 0.25 percent of carbon
Base rate: FreeSource retrieved: 2026-06-01
7217.20.60.00
Containing by weight less than 0.25 percent of carbon
Base rate: FreeSource retrieved: 2026-06-01
7217.30.15
Flat wire
Base rate: FreeSource retrieved: 2026-06-01
7217.30.30.00
With a diameter of 1.5 mm or more and containing by weight less than 0.25 percent of carbon
Base rate: FreeSource retrieved: 2026-06-01
7217.30.60.00
Containing by weight less than 0.25 percent of carbon
Base rate: FreeSource retrieved: 2026-06-01
7217.90.10.00
Coated with plastics
Base rate: FreeSource retrieved: 2026-06-01
7218.10.00.00
Ingots and other primary forms
Base rate: FreeSource retrieved: 2026-06-01
7218.91.00
Of rectangular (other than square) cross-section
Base rate: FreeSource retrieved: 2026-06-01
7219.11.00
Of a thickness exceeding 10 mm
Base rate: FreeSource retrieved: 2026-06-01
7219.12.00
Of a thickness of 4.75 mm or more but not exceeding 10 mm
Base rate: FreeSource retrieved: 2026-06-01
7219.13.00
Of a thickness of 3 mm or more but less than 4.75 mm
Base rate: FreeSource retrieved: 2026-06-01
7219.14.00
Of a thickness of less than 3 mm
Base rate: FreeSource retrieved: 2026-06-01
7219.21.00
Of a thickness exceeding 10 mm
Base rate: FreeSource retrieved: 2026-06-01
7219.22.00
Of a thickness of 4.75 mm or more but not exceeding 10 mm
Base rate: FreeSource retrieved: 2026-06-01
7219.23.00
Of a thickness of 3 mm or more but less than 4.75 mm
Base rate: FreeSource retrieved: 2026-06-01
7219.24.00
Of a thickness of less than 3 mm
Base rate: FreeSource retrieved: 2026-06-01
7219.31.00
Of a thickness of 4.75 mm or more
Base rate: FreeSource retrieved: 2026-06-01
7219.32.00
Of a thickness of 3 mm or more but less than 4.75 mm
Base rate: FreeSource retrieved: 2026-06-01
7219.33.00
Of a thickness exceeding 1 mm but less than 3 mm
Base rate: FreeSource retrieved: 2026-06-01
7219.34.00
Of a thickness of 0.5 mm or more but not exceeding 1 mm
Base rate: FreeSource retrieved: 2026-06-01
7219.35.00
Of a thickness of less than 0.5 mm
Base rate: FreeSource retrieved: 2026-06-01
7220.11.00.00
Of a thickness of 4.75 mm or more
Base rate: FreeSource retrieved: 2026-06-01
7220.12.10.00
Of a width of 300 mm or more
Base rate: FreeSource retrieved: 2026-06-01
7220.12.50.00
Of a width of less than 300 mm
Base rate: FreeSource retrieved: 2026-06-01
7220.20.10
Of a width of 300 mm or more
Base rate: FreeSource retrieved: 2026-06-01
7220.20.60
Of a thickness exceeding 1.25 mm
Base rate: FreeSource retrieved: 2026-06-01
7220.20.70
Of a thickness exceeding 0.25 mm but not exceeding 1.25 mm
Base rate: FreeSource retrieved: 2026-06-01
7220.20.80.00
Razor blade steel
Base rate: FreeSource retrieved: 2026-06-01
7221.00.00
Bars and rods, hot-rolled, in irregularly wound coils, of stainless steel
Base rate: FreeSource retrieved: 2026-06-01
7222.11.00
Of circular cross-section
Base rate: FreeSource retrieved: 2026-06-01
7222.20.00
Bars and rods, not further worked than cold-formed or cold-finished
Base rate: FreeSource retrieved: 2026-06-01
7222.30.00
Other bars and rods
Base rate: FreeSource retrieved: 2026-06-01
7222.40.30
Hot-rolled, not drilled, not punched and not otherwise advanced
Base rate: FreeSource retrieved: 2026-06-01
7223.00.10
Round wire
Base rate: FreeSource retrieved: 2026-06-01
7223.00.50.00
Flat wire
Base rate: FreeSource retrieved: 2026-06-01
7224.10.00
Ingots and other primary forms
Base rate: FreeSource retrieved: 2026-06-01
7225.11.00.00
Grain-oriented
Base rate: FreeSource retrieved: 2026-06-01
7225.30.11
Of tool steel
Base rate: FreeSource retrieved: 2026-06-01
7225.30.51
Of tool steel
Base rate: FreeSource retrieved: 2026-06-01
7225.40.11
Of tool steel
Base rate: FreeSource retrieved: 2026-06-01
7225.40.51
Of tool steel
Base rate: FreeSource retrieved: 2026-06-01
7225.50.11
Of tool steel
Base rate: FreeSource retrieved: 2026-06-01
7225.50.60.00
Of a thickness of 4.75 mm or more
Base rate: FreeSource retrieved: 2026-06-01
7225.50.70.00
Heat-resisting steel
Base rate: FreeSource retrieved: 2026-06-01
7225.91.00.00
Electrolytically plated or coated with zinc
Base rate: FreeSource retrieved: 2026-06-01
7225.92.00.00
Otherwise plated or coated with zinc
Base rate: FreeSource retrieved: 2026-06-01
7226.11.10.00
Of a width of 300 mm or more
Base rate: FreeSource retrieved: 2026-06-01
7226.11.90
Of a width of less than 300 mm
Base rate: FreeSource retrieved: 2026-06-01
7226.19.10.00
Of a width of 300 mm or more
Base rate: FreeSource retrieved: 2026-06-01
7226.19.90.00
Of a width of less than 300 mm
Base rate: FreeSource retrieved: 2026-06-01
7226.20.00.00
Of high-speed steel
Base rate: FreeSource retrieved: 2026-06-01
7226.91.05.00
Of chipper knife steel
Base rate: FreeSource retrieved: 2026-06-01
7226.91.15
Of a width of 300 mm or more
Base rate: FreeSource retrieved: 2026-06-01
7226.91.25
Of a width of less than 300 mm
Base rate: FreeSource retrieved: 2026-06-01
7226.91.50.00
Of a thickness of 4.75 mm or more
Base rate: FreeSource retrieved: 2026-06-01
7226.91.70.00
Of a width of 300 mm or more
Base rate: FreeSource retrieved: 2026-06-01
7226.91.80.00
Of a width of less than 300 mm
Base rate: FreeSource retrieved: 2026-06-01
7226.92.10
Of a width of 300 mm or more
Base rate: FreeSource retrieved: 2026-06-01
7226.92.30
Of a width of less than 300 mm
Base rate: FreeSource retrieved: 2026-06-01
7226.92.50.00
Of a width of 300 mm or more
Base rate: FreeSource retrieved: 2026-06-01
7226.92.70
Of a thickness not exceeding 0.25 mm
Base rate: FreeSource retrieved: 2026-06-01
7226.92.80
Of a thickness exceeding 0.25 mm
Base rate: FreeSource retrieved: 2026-06-01
7227.10.00.00
Of high-speed steel
Base rate: FreeSource retrieved: 2026-06-01
7227.20.00
Of silico-manganese steel
Base rate: FreeSource retrieved: 2026-06-01
7227.90.10
Not tempered, not treated, and not partly manufactured
Base rate: FreeSource retrieved: 2026-06-01
7228.10.00
Bars and rods, of high-speed steel
Base rate: FreeSource retrieved: 2026-06-01
7228.20.10.00
Not cold-formed
Base rate: FreeSource retrieved: 2026-06-01
7228.20.50.00
Cold-formed
Base rate: FreeSource retrieved: 2026-06-01
7228.30.20.00
Of ball-bearing steel
Base rate: FreeSource retrieved: 2026-06-01
7228.30.40.00
Of chipper knife steel, not cold-formed
Base rate: FreeSource retrieved: 2026-06-01
7228.40.00.00
Other bars and rods, not further worked than forged
Base rate: FreeSource retrieved: 2026-06-01
7228.50.10
Of tool steel (other than high-speed steel)
Base rate: FreeSource retrieved: 2026-06-01
7228.60.10
Of tool steel (other than high-speed steel)
Base rate: FreeSource retrieved: 2026-06-01
7228.60.60.00
Not cold-formed
Base rate: FreeSource retrieved: 2026-06-01
7228.60.80.00
Cold-formed
Base rate: FreeSource retrieved: 2026-06-01
7228.70.30
Hot-rolled, not drilled, not punched and not otherwise advanced
Base rate: FreeSource retrieved: 2026-06-01
7228.80.00.00
Hollow drill bars and rods
Base rate: FreeSource retrieved: 2026-06-01
7229.20.00
Of silico-manganese steel
Base rate: FreeSource retrieved: 2026-06-01
7229.90.05.00
Of high-speed steel
Base rate: FreeSource retrieved: 2026-06-01
7229.90.10.00
Flat wire
Base rate: FreeSource retrieved: 2026-06-01
7229.90.50
Round wire
Base rate: FreeSource retrieved: 2026-06-01
7229.90.90.00
Other wire
Base rate: FreeSource retrieved: 2026-06-01