Chapter hub
Chapter 76: Aluminum and articles thereof
Browse verified, indexable HTS detail pages in this chapter. Each record links to base duty, source URL, retrieval date, and review boundaries. Aluminum profiles, foil, sheets, and finished aluminum articles.
41 indexable codes
Common headings on this page
7601 · 37602 · 17603 · 27604 · 57605 · 27606 · 47607 · 57608 · 27609 · 17610 · 1
HTS detail pages
7601.10.30.00
Of uniform cross section throughout its length, the least cross-sectional dimension of which is not greater than 9.5 mm, in coils
Base rate: 2.6%Source retrieved: 2026-10-09
7601.20.30.00
Of uniform cross section throughout its length, the least cross-sectional dimension of which is not greater than 9.5 mm, in coils
Base rate: 2.6%Source retrieved: 2026-10-09
7601.20.60.00
Containing 25 percent or more by weight of silicon
Base rate: 2.1%Source retrieved: 2026-10-09
7602.00.00
Aluminum waste and scrap
Base rate: FreeSource retrieved: 2026-10-09
7603.10.00.00
Powders of non-lamellar structure
Base rate: 5%Source retrieved: 2026-10-09
7603.20.00.00
Powders of lamellar structure; flakes
Base rate: 3.9%Source retrieved: 2026-10-09
7604.10.10.00
Profiles
Base rate: 5%Source retrieved: 2026-10-09
7604.10.30.00
Having a round cross section
Base rate: 2.6%Source retrieved: 2026-10-09
7604.21.00
Hollow profiles
Base rate: 1.5%Source retrieved: 2026-10-09
7604.29.10
Other profiles
Base rate: 5%Source retrieved: 2026-10-09
7604.29.30
Having a round cross section
Base rate: 2.6%Source retrieved: 2026-10-09
7605.11.00.00
Of which the maximum cross-sectional dimension exceeds 7 mm
Base rate: 2.6%Source retrieved: 2026-10-09
7605.21.00.00
Of which the maximum cross-sectional dimension exceeds 7 mm
Base rate: 2.6%Source retrieved: 2026-10-09
7606.11.30
Not clad
Base rate: 3%Source retrieved: 2026-10-09
7606.12.30
Not clad
Base rate: 3%Source retrieved: 2026-10-09
7606.91.30
Not clad
Base rate: 3%Source retrieved: 2026-10-09
7606.92.30
Not clad
Base rate: 3%Source retrieved: 2026-10-09
7607.11.30.00
Of a thickness not exceeding 0.01 mm
Base rate: 5.8%Source retrieved: 2026-10-09
7607.11.60
Of a thickness exceeding 0.01 mm
Base rate: 5.3%Source retrieved: 2026-10-09
7607.19.10.00
Etched capacitor foil
Base rate: 5.3%Source retrieved: 2026-10-09
7607.19.30.00
Cut to shape, of a thickness not exceeding 0.15 mm
Base rate: 5.7%Source retrieved: 2026-10-09
7607.20.10.00
Covered or decorated with a character, design, fancy effect or pattern
Base rate: 3.7%Source retrieved: 2026-10-09
7608.10.00
Of aluminum, not alloyed
Base rate: 5.7%Source retrieved: 2026-10-09
7608.20.00
Of aluminum alloys
Base rate: 5.7%Source retrieved: 2026-10-09
7609.00.00.00
Aluminum tube or pipe fittings (for example, couplings, elbows, sleeves)
Base rate: 5.7%Source retrieved: 2026-10-09
7610.10.00
Doors, windows and their frames and thresholds for doors
Base rate: 5.7%Source retrieved: 2026-10-09
7611.00.00
Aluminum reservoirs, tanks, vats and similar containers, for any material (other than compressed or liquefied gas), of a capacity exceeding 300 liters, whether or not lined or heat insulated, but not fitted with mechanical or thermal equipment
Base rate: 2.6%Source retrieved: 2026-10-09
7612.10.00.00
Collapsible tubular containers
Base rate: 2.4%Source retrieved: 2026-10-09
7612.90.10
Of a capacity not exceeding 20 liters
Base rate: 5.7%Source retrieved: 2026-10-09
7613.00.00.00
Aluminum containers for compressed or liquefied gas
Base rate: 5%Source retrieved: 2026-10-09
7614.10.10.00
Not fitted with fittings and not made up into articles
Base rate: 4.9%Source retrieved: 2026-10-09
7614.10.50.00
Fitted with fittings or made up into articles
Base rate: 4.9%Source retrieved: 2026-10-09
7614.90.20
Electrical conductors
Base rate: 4.9%Source retrieved: 2026-10-09
7614.90.50.00
Fitted with fittings or made up into articles
Base rate: 5.7%Source retrieved: 2026-10-09
7615.10.11.00
Pot scourers and scouring or polishing pads, gloves and the like
Base rate: 3.1%Source retrieved: 2026-10-09
7615.20.00.00
Sanitary ware and parts thereof
Base rate: 3.8%Source retrieved: 2026-10-09
7616.10.10.00
Nails, tacks and staples
Base rate: 5.7%Source retrieved: 2026-10-09
7616.10.50.00
Cotters and cotter pins
Base rate: 5.7%Source retrieved: 2026-10-09
7616.10.70
Having shanks, threads or holes over 6 mm in diameter
Base rate: 5.5%Source retrieved: 2026-10-09
7616.91.00.00
Cloth, grill, netting and fencing, of aluminum wire
Base rate: 2.5%Source retrieved: 2026-10-09
7616.99.10.00
Luggage frames
Base rate: FreeSource retrieved: 2026-10-09